 |
 |
 |
 |
Beginner Track Day Performance Rear Brake Pads
- Carbotech compounds
Carbotech™ AX6™ (1106™): The AX6™ takes the place of the Panther Plus™ compound that was so successful. AX6™ was specifically engineered for Autocross applications. A high torque brake compound delivering reliable and consistent performance over a very wide operating temperature range (150°F to 1250°F +). Advanced compound matrix provides an excellent initial “bite”, high coefficient of friction, and very progressive brake modulation and release characteristics. AX6™ offers high fade resistance, rotor friendliness at all temperatures, excellent cold stopping power, and non corrosive dust. As a result, AX6™ is an excellent choice for Autocross & novice track day drivers and beginner high performance driver education (HPDE) drivers on street driven cars using street tires eliminating the need to change brake pads at the track. AX6™ has gained tremendous popularity with SCCA Prosolo/Solo2 competitors for its fantastic bite, release & modulation. Many drivers use the AX6™ for street driving as well, even though Carbotech doesn’t recommend street driving with AX6™ due to possible elevated levels of dust and noise. Which compound is best for me? There is no one answer for every person and/or every car. One drivers driving style and their vehicle might find the performance of our XP10 the best. Another driver with the exact same car might find the XP12 to suit them the best. A third driver with the same car, but different tires might find the XP8 compound to work best for their car, driving style, and tires. So, we can help you narrow it down to one or two compounds based on what you tell us; then we can give you the different characteristics of the two and let you decide (we will give our opinion on which compound we think will suit your needs the best). You might know just based off what you read on our site. Read the entire compound description section first, then if you still don’t know or have any questions at all please give us a call or send us an email. At Carbotech all of our customer service specialists are also racers and track day enthusiasts that have the technical knowledge and on-track experience to assist you in every way. Carbotech Overview & Philosophy Carbotech Performance Brakes™, the world leader in Ceramic friction materials™. Carbotech is the only brake pad manufacturer in the world with a complete line of Ceramic compounds for street, autocross, and track use. Carbotech-Ceramic™ compounds are known for their unsurpassed release & modulation, while maintaining very consistent torque control characteristics. Carbotech brake pads are extremely rotor friendly, that’s something that has been unmatched by any other brake pad in the industry. Carbotech Performance Brakes™ are also leading the way with HPDE (track day) groups and drivers. We can help you find the perfect set up for your vehicle by having a whole line up of track pads to customize for your front & rear brake applications. Carbotech uses advanced friction technology to perfect all of their compounds for the street & track. Research & Development (R&D) is not just a company philosophy, it’s a way of life at Carbotech, a 365 days a year job that never has an end in sight. Continuous improvement is a cornerstone in Carbotech’s solid reputation, because great compounds are not engineered overnight. You’ll find that no one else in the industry releases new compound formulations like Carbotech consistently does. We don’t believe in finding a good compound and trying to ride it as long as possible, we have a saying around here that is imbedded into every employee’s thought process; it’s called “continuous improvement, with no end in sight™”. We strive in constantly improving our existing compounds as new technologies and materials come to market. In fact, the Bobcat 1521™ compound is arguably our most successful compound, and it continues to gain enormous popularity among the performance industry. But we did rest on its success; we have just improved the Bobcat 1521™ compound to be even quieter and smoother for the driver while keeping its legendary performance. Currently Carbotech is developing another track compound that will exceed the XP12™. Also in the works is an endurance compound that will be suitable for all endurance applications. You will most likely find a Carbotech employee at most SCCA/NASA events as well as a great number of HPDE events providing customer support and trouble shooting any brake issues; even if they aren’t Carbotech brake pads. We don’t just sell you a set of brake pads; we deliver unmatched customer support and technical help. Carbotech Performance Brakes™ allows drives to Go Deep™ into the corners and out brake the competition. Carbotech has won multiple national championships, pro races, and rallies all over the world. Our race compounds start with the letters "XP™" then they are followed by a number. The first number is 8 (XP8™), and as you go up in numbers the initial bite gets much stronger, higher fade resistance, higher torque, better wear rate, and an increase in the temperature range. On that same note, as you go up in our compound numbers you will get more aggressive on the rotors. But, even our XP12™ compound is still very rotor friendly compared to the competition. With all Carbotech compounds you will have to apply a little bit more pedal pressure to get our pads to stop the car. That's because you have the ability to modulate your pedal with our ceramic pads. That's a huge advantage to any driver, especially a driver who has a good feel for their car. The more you can modulate your brakes (under control) the more car control you have under braking coming into the braking zone and the first half of a corner. Control which in the end helps you attain faster lap times and more consistent lap times.
Brake pads that just grab real hard like an "on/off" switch are upsetting the balance of the car by violently throwing all that weight forward (not to mention that you don't get any modulation with an "on/off" type of brake pad). You don't realize how much it upsets your car until you have tried Carbotech Performance Brake pads. Carbotech has a five (plus) year head start on the competition when it comes to our great philosophy on release & modulation, rotor friendliness, non-corrosive dust, and that great consistent bite. Quite a few companies haven’t even caught on yet to what Carbotech figured out over a half a decade ago. For More information about Carbotech brake pads go to the following link: http://www.ctbrakes.com/faqs#4
|
|
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
Features
- Ford Fusion Carbotech AX6 Autocross / Beginner Track Day Performance Rear Brake Pads CT1161
- Autocross / HPDE and Novice track days Brake Pad set. The AX6™ is safe for the street and does well on the track with cars using street tires eliminating the need to change brake pads at the track.
- Go Deeper Into the Corners on Lapping Days, Carbotech has been heavily involved club professional racing for more than 13 years
- We have ourselves tried many competing products on our shop Time Trials Mustang andCarbotech is track proven to be 1) Longer Lasting under Extreme Conditions 2) Brake harder longer with less fade 3) Is the Easiest on the rotors and is less likely to overheat
- On the autocross course, it’s all about getting to the next turn faster and under total control. The experts at Carbotech have years of experience developing the right brake pad compounds for a winning performance between the cones
- Carbotech pads and shoes use proprietary Ceramic / Copper Metallic construction
- The carbon in other pads combine the Iron / Carbon on the pad with the Iron from your rotor to form carbide, which is used in cutting tools. When you combine the presence of Carbide with extreme pressure and heat you can imagine what that can do to your rotors
- Carbotech Performance Brakes's Ceramic based compounds are “rotor friendly,” eliminating the grabbing locking up that keep so many drivers cars from performing at their peak.
- You want go deep gain those precious fractions of a second before need to brake, and only Carbotech brakes let you do just that. In every turn, all race long.
- AX6™ was specifically engineered for Autocross applications. A high torque brake compound delivering reliable and consistent performance over a very wide operating temperature range (150°F to 1250°F +).
- Their AX6 also excels for an Excellent choice for entry level HPDE and Novice track days.
- The AX6 is safe for the street and does well on the track with cars using street tires eliminating the need to change brake pads at the track.
- Carbotech brakes deliver longer brake pad and rotor life - up to four times longer than competitive brakes
- Carbotech use custom compounds to match specific cars, driving styles and applications.
- Carbotech Part# CT1164 Fits the following models: 2006-2010 Fusion V6 and 4 Cyl
|
|
 |
 |
 |
 |

|